Home

Model 34A

FIGURE 1
(The Picoprobe® Model 34A can be mounted on any micropositioner for use with any probing system.)
The PICOPROBE® MODEL 34A was engineered to meet the stringent demands of advanced high frequency circuit designers. This high impedance probe combines full DC capability, rise/fall times of 120 ps, and a nominal loading input impedance of 10 megohm shunted by 0.1 pf. Signal attenuation is 20:1 with a 50 ohm oscilloscope input. Like our other active probes, the Model 34A achieves its bandwidth using just one probe point, which greatly simplifies internal node testing without sacrificing performance. An assortment of user replaceable probe tips are available for a variety of probing needs. The Model 34A is powered by our standard Picoprobe® power supply.

 

Specifications
Input Capacitance

0.1pf

Input Resistance

10.0 megohm

Rise/fall time

120 ps (5V pulse)

Frequency Response

DC to 3 GHz (-3dB)

Operating Range

-7V to +10V

Linearity

0.5%

Gain Accuracy

±3%

Signal Attenuation

20 : 1

FIGURE 2


Model 34A Replacement Tips
Part
Number
Tungsten Probing Wire
Shaft Diameter
Point Radius



34A-4-5 5 micron <0.1 micron
34A-4-10 10 micron <0.1 micron
34A-4-22 22 micron <1.0 micron
34A-4-35 35 micron <2.0 micron
34A-4-60 60 micron <3.0 micron
34A-4-125 125 micron <5.0 micron
FIGURE 3 photo not to scale

Requires the use of a Picoprobe® Power Supply. Please specify 110V or 220V when ordering.

Model 34A Pdf Home Page

GGB INDUSTRIES, INC. P.O. BOX 10958 NAPLES, FL 34101
Telephone (239) 643-4400 Fax (239) 643-4403 Email email@ggb.com

Picoprobe® is a registered trademark of GGB Industries, Inc.